Introduction to Many Types of Fittings in the Industry

Articles, Educational, Piping

Today, industrial fittings have many applications and They are used in many applications. Types of connections in the industry have special features that have made many people today interested in buying and using them. There are different types of industrial fittings, each with different applications.

If you are one of those people who want to get acquainted with the types of connections in the industry, reading this article can provide you with comprehensive and complete information in this field.

Introduction to Pipe Nipple in industry and their applications

Pipe nipple can be used when there is a need to connect to two different pipes. Pipe nipples are one of the most important types of connections in Piping, and using them can bring many benefits.

One of the most important uses of these fittings is when you need to change the diameter of your piping and use pipes with different diameters in your piping path. In such cases, you can easily use them and change the diameters in your piping lines.

The Pipe nipple consist of a piece of metal that is made using casting and the two ends of which are also designed and made in the form of threads, and this factor helps you to easily connect the two pieces using it.

These connections have different types, including twisted and screw nuts as well as simple screw nuts, each of which is used in specific cases.

Introduction to with Pipe Cap/Fittings: One of the most important types of fittings in Piping

Another type of fitting in the industry that is required in all piping systems is the pipe cap, which is used to block the piping route. When your piping route is completed, you must prevent the flow of fluid from continuing using pipe cap or pipe fitting.

In addition, sometimes you may not need to use some of your pipes, in which case you can easily use the pipe cap and block the piping route.

In piping routes where the diameter of the pipes is smaller, rectangular caps can be used to block the route, but if you use pipes in your pipeline route that have a large diameter, we suggest that you use hexagonal tube caps that Specially designed and built for these items.

There are different types of pipe caps and they are usually made of different raw materials, including steel, plastic and many different metals.

GI Union and its applications

GI union is one of the types of fittings in piping that is used to connect two pipes to each other and has many applications. The two ends of these parts are usually threaded, which allows you to connect the pipes together as easily as you can.

In fact, these two ends of the GI union are also known as the male and female tubular vertebrae, which are placed inside the tubes. GI union can be considered as one of the most important industrial connections because most of the time you will need them to connect two different pipes to each other in your piping path.

The middle part of the GI union acts as an interface between the two tubes and the fluid you want flows through the tubes. One of the most important uses of these parts in plumbing is when you have a broken pipe in your piping path.

In such cases, you can cut the broken part and easily reconnect the two separated parts using a GI union. This way, there is no need to replace all the pipes, and you can repair this fracture at the lowest cost.

Introduction to Tee and Cross Pipe Fittings

Tee and Cross Pipe Fittings are one of the most widely used and important types of fittings in Piping, whose main role is to create a branch in the piping path, and therefore have many users. Tee pipe fittings are used when you intend to branch off in a straight line to three different paths. These routes have different types, the most important of which are conversion routes and equivalent routes.

Another very widely used fitting in the Piping today is cross fittings. These fittings have exactly the same function as Tee pipe fitting, and the only difference is that cross- ones are able to create the branches you need in four different ways. These two interfaces are commonly used in both industrial and construction piping

Bushing is one of the most important fittings in the industry

Bushing is one of the types of fittings in the industry, which at the inside of it, there are designed to have threads, and for this reason, it can be used to connect pipes whose outer parts have threads, and enjoy its advantages. In fact, bushing is one of the fittings that is used to connect two different pipes in a straight line.

The outer part of the tubes, which are designed and made in the form of threads, is placed inside the bushing and thus it is fixed inside it. Pipes connected by bushings are usually very strong and sturdy, and at high fluid pressures there is no problem in the piping path, and you can use them safely.

Bushings, like many different types of industrial fittings, have different models, each of which has its own characteristics and applications. Among the different models of these connections, we can mention the adapter bushing, the ABS bushing, the reducer bushing, the double taped bushing and the simple bushing.

Polad Pich Kar Company is proud to offer this product with the highest quality compared to similar samples in foreign and domestic markets. For more information and to order the product, contact us.
Share this article!
Read More …

Leave a Reply

Your email address will not be published.

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu